Download Free Adsorption Heat Pumps Book in PDF and EPUB Free Download. You can read online Adsorption Heat Pumps and write the review.

This volume introduces the fundamentals of adsorption heat pumps, beginning with the simplest cycle and building to the most complex. Selection of adsorbents and refrigerants, design of adsorption beds and auxiliary heat exchangers, and applications for different designs are all discussed. The book educates engineering students, engineers, and researchers about an environmentally friendly alternative to vapor compression refrigeration systems promising for many applications. The authors cover thermodynamic cycles, working materials for the cycles, and aspects of designing and modeling adsorption heat pumps. Elucidates the various applications of adsorption heat pumps; Illustrates modeling techniques for quickly screening new working materials early in their development; Provides comprehensive review of cycle types, with discussion of the applications for which they are best suited; Appropriate for graduate courses on advanced thermodynamics, design of thermal systems, sustainable energy technology, refrigeration technologies, and thermal control of electronics.
This volume introduces the fundamentals of adsorption heat pumps, beginning with the simplest cycle and building to the most complex. Selection of adsorbents and refrigerants, design of adsorption beds and auxiliary heat exchangers, and applications for different designs are all discussed. The book educates engineering students, engineers, and researchers about an environmentally friendly alternative to vapor compression refrigeration systems promising for many applications. The authors cover thermodynamic cycles, working materials for the cycles, and aspects of designing and modeling adsorption heat pumps. Elucidates the various applications of adsorption heat pumps; Illustrates modeling techniques for quickly screening new working materials early in their development; Provides comprehensive review of cycle types, with discussion of the applications for which they are best suited; Appropriate for graduate courses on advanced thermodynamics, design of thermal systems, sustainable energy technology, refrigeration technologies, and thermal control of electronics.
Until very recently, energy supply of the world has been treated as being nearly inexhaustible. Nowadays about 90 percent of the energy used is obtained from non-renewable resources: oil, natural gas, coal and uranium. These resources are being used up at an alarming rate. To meet our demands we are now searching for new sources of energy. One of these new sources of energy is solar energy which will assume increasing importance. It is free but means must be developed to use it economically. Research is actively under way to reduce the storage cost of this low intensity energy and for the design of economical systems. The purpose of this Institute is to provide an international forum for the dissemination of information on solar energy utilization: fundamentals and applications in industry. This meeting is primarily a high level teaching activity. The subject is treated in considerable depth by lecturers eminent in their field. The other participants include scientists, engineers, and senior graduate students who themselves are involved in a similar research and who wish to learn more about current developments, as well as scientists from other areas who are planning to research on solar energy. The lectures are supplemented by informal discussions designed to encourage the free and critical exchange of ideas. A limited number of contributions are also included. This volume contains both basic and applied information contributed during the Institute. The editors appreciate the cooperation of Martinus Nijhoff Publishezsin making the proceedings widely available.
The text describes the main features of currently available heat pumps, focusing on system operation and interactions with external heat sources. In fact, before choosing a heat pump, several aspects must be assessed in detail: the actual climate of the installation site, the building’s energy requirements, the heating system, the type of operation etc. After discussing the general working principles, the book describes the main components of compression machines – for EHPs, GHPs and CO2 heat pumps. It then addresses absorption heat pumps and provides additional details on the behavior of two-fluid mixtures. The book presents a performance comparison for the different types, helping designers choose the right one for their needs, and discusses the main refrigerants. Notes on helpful additional literature, websites and videos, also concerning relevant European regulations, round out the coverage. This book will be of interest to all engineers and technicians whose work involves heat pumps. It will also benefit students in energy engineering degree programs who want to deepen their understanding of heat pumps.
The purpose of MetFoam conference series is to provide a state-of-the-art review on lightweight porous metals and metallic foams and a forum for discussions and networking opportunities for scientists working in this field. Topics included in this volume include the following: • Fabrication by conventional and novel methods including additive manufacturing • Characterization • Properties of compressed and uncompressed foam • Design of porous metals, metallic foams, and lattice structures• Fluid, heat, and mass transfer • Porous biomaterials• Nanoporous metals• Industrial applications of porous metals and metallic foams
Heat pumps (HPs) allow for providing heat without direct combustion, in both civil and industrial applications. They are very efficient systems that, by exploiting electrical energy, greatly reduce local environmental pollution and CO2 global emissions. The fact that electricity is a partially renewable resource and because the coefficient of performance (COP) can be as high as four or more, means that HPs can be nearly carbon neutral for a full sustainable future. The proper selection of the heat source and the correct design of the heat exchangers is crucial for attaining high HP efficiencies. Heat exchangers (also in terms of HP control strategies) are hence one of the main elements of HPs, and improving their performance enhances the effectiveness of the whole system. Both the heat transfer and pressure drop have to be taken into account for the correct sizing, especially in the case of mini- and micro-geometries, for which traditional models and correlations can not be applied. New models and measurements are required for best HPs system design, including optimization strategies for energy exploitation, temperature control, and mechanical reliability. Thus, a multidisciplinary approach of the analysis is requested and become the future challenge.
This accessible book presents unconventional technologies in heat exchanger design that have the capacity to provide solutions to major concerns within the process and power-generating industries. Demonstrating the advantages and limits of these innovative heat exchangers, it also discusses micro- and nanostructure surfaces and micro-scale equipment, and introduces pillow-plate, helical and expanded metal baffle concepts. It offers step-by-step worked examples, which provide instructions for developing an initial configuration and are supported by clear, detailed drawings and pictures. Various types of heat exchangers are available, and they are widely used in all fields of industry for cooling or heating purposes, including in combustion engines. The market in 2012 was estimated to be U$ 42.7 billion and the global demand for heat exchangers is experiencing an annual growth of about 7.8 %. The market value is expected to reach U$ 57.9 billion in 2016, and approach U$ 78.16 billion in 2020. Providing a valuable introduction to students and researchers, this book offers clear and concise information to thermal engineers, mechanical engineers, process engineers and heat exchanger specialists.
Refrigeration, air conditioning, and heat pumps (RACHP) have an important impact on the final energy uses of many sectors of modern society, such as residential, commercial, industrial, transport, and automotive. Moreover, RACHP also have an important environmental impact due to the working fluids that deplete the stratospheric ozone layer, which are being phased out according to the Montreal Protocol (1989). Last, but not least, high global working potential (GWP), working fluids (directly), and energy consumption (indirectly) are responsible for a non-negligible quota of greenhouse gas (GHG) emissions in the atmosphere, thus impacting climate change.
This book proposes a radically new approach for characterizing thermophysical and mechanical properties of zeolite-based adsorbent coatings for Adsorptive Heat Transformers (AHT). It presents a developed standard protocol for the complete characterization of advanced coated adsorbers. Providing an in-depth analysis of the different procedures necessary for evaluating the performance of adsorbers, it also presents an analysis of their stability under the hydrothermal and mechanical stresses during their entire life cycle. Adsorptive Heat Transformers (AHT), especially adsorption chillers and heat pumps, are considered to be promising technologies to increase thermal energy efficiency. Nevertheless, an overall increase in performance of this apparatus is necessary for them to be considered a mature technology to be used commercially. Development of innovative coated adsorbers can be perceived as a key issue for the enhancement of AHT technology. This procedure relies on the deposition, either by means of a binder or by direct crystallization, of the adsorbent material over a metallic heat exchanger, aiming at the improvement of the heat transfer between the external heat source and the adsorbent itself. This book offers a valuable resource to those working on the development of novel adsorbent materials and advanced adsorbent beds for heating and cooling applications. It is also intended for researchers interested in renewable energy and energy efficiency.
This book gathers selected papers from the 16th UK Heat Transfer Conference (UKHTC2019), which is organised every two years under the aegis of the UK National Heat Transfer Committee. It is the premier forum in the UK for the local and international heat transfer community to meet, disseminate ongoing work, and discuss the latest advances in the heat transfer field. Given the range of topics discussed, these proceedings offer a valuable asset for engineering researchers and postgraduate students alike.